Product
Triangle Aluminium Road Sign Blank – 1.6 mm, Radius Corners
From $30.00 AUD inc. GST
Precision-Cut Give Way Sign Blanks
Create professional Give Way, yield and custom triangular signage with a precision-cut 1.6 mm 5052 aluminium sign blank.
Each size follows the corresponding TfNSW R1-2 profile geometry. The listed width and height describe the theoretical sharp-triangle datum used to set out the profile. The finished blank has smooth, radiused corners, with the same radius applied to all three corners.
Available Sizes
| Variant | Datum Width × Height | Corner Radius |
|---|---|---|
| 375 mm High — R1-2AA | 433 × 375 mm | 3 × R20 |
| 750 mm High — R1-2A | 866 × 750 mm | 3 × R40 |
| 900 mm High — R1-2B | 1039 × 900 mm | 3 × R48 |
| 1200 mm High — R1-2C | 1386 × 1200 mm | 3 × R64 |
All dimensions are in millimetres.
Product Features
- Precision-cut from 1.6 mm 5052 aluminium
- TfNSW R1-2 profile geometry
- Equal-radius treatment on all three corners
- Lightweight, durable and corrosion resistant
- Mill-finish surface ready for appropriate preparation and application of reflective film or graphics
- Suitable for traffic signage, private roads, car parks, industrial sites and custom triangular signs
Mounting Holes
The 750 mm and 900 mm variants can be supplied with two 11 × 11 mm square mounting holes centred on the vertical axis. Standard hole centres are 520 mm apart, with the lower hole centre positioned 100 mm above the theoretical bottom point.
Mounting and bracing requirements for the 375 mm and 1200 mm profiles may vary. Please confirm your required hole pattern when ordering.
What You Receive
- One precision-cut triangular aluminium sign blank in your selected size
- Blank aluminium only unless another option is specified
- Reflective sheeting, printed graphics, posts, brackets and mounting hardware are not included
Bulk Order Discounts
Automatic quantity discounts are available, with savings of up to 35% on orders of 100 or more. Discounts are applied according to the quantity selected.
Regulated Road Sign Applications
The blank profile dimensions follow TfNSW R1-2 geometry. For regulated public-road use, the completed sign must also use the alloy temper, reflective sheeting, fabrication, mounting and bracing specified by the relevant road authority.
Need a custom size or mounting arrangement? Contact us with your required dimensions and hole pattern for a custom cutting quote.